Program, test and debug the Youbionic X8 in real time — with Vision AI, IMU and live servo data — then download every printable part, follow the 3D assembly guide and run the same walking code on your robot.
Wrong servo, wrong limit, wrong part — you find out only after printing and assembling. Then you reprint.
Testing a new gait on real hardware means stripped gears, cracked shells and burned servos.
No joint data, no IMU traces, no idea why it tipped over. Just guesses and another attempt.
YB Sim Studio X8 lets you make every mistake in simulation, for free — and build the real robot only when the data says it works.
Robotics engineering, artificial intelligence and motion control in a single workspace — built around a real, buildable humanoid: the Youbionic X8.
Tune a gait in minutes, not print cycles.
Validate ideas before touching hardware.
STL files, assembly guide and code included.
No renders, no mock-ups. This is YB Sim Studio X8 running the X8 humanoid.
Stand, Walk, Climb stairs, Squat, Wave, Look around, Grip. Drive it with the arrow keys and tune step, period, sway and lift live.
The robot's camera feed is analysed live: stairs, rough terrain, crates, slopes and other robots are detected with distance.
Every joint traced in real time, with gauges that turn amber and red when a servo runs past its rated speed.
A simulated IMU with estimated vs. true orientation. Add sensor noise and gyro bias, push the robot, and watch it react.
Position, target and mechanical limits for each joint — from waist and knees down to eyelids and fingertips — with the servo that drives it.
Stairs, ramps, slalom cones, stepping stones, cross slope, low-friction floor, crates and a moving cart. Add more robots and take control of any of them.
Generated from the X8 CAD, in millimetres, already oriented. Grouped by body section, with a parts list CSV in every ZIP.
From feet to head in 15 animated steps. Each step shows which servos go in, which printed parts you need and a hint on how to fit them.
Downloadable ZIP for Raspberry Pi 5 (Node.js), same planner as the sim.
Servos, brackets, electronics and power, exportable as CSV.
Channel map for 3× PCA9685, zero and limits per servo, as JSON.
Take the model into your own robotics toolchain.
Print files, illustrated build guides and a full electronics and programming manual, all in English. Made for makers who want to get it right the first time.
95 ready-to-print files in 5 folders, one per body section, already in print orientation. Every file name tells you what it is, how many to print and which side it goes on.
003-N1-R.stl
From the first print to the last screw. Each guide covers one stage of the build, with renders, tables and checklists.
A 40-page manual that takes you from an empty torso to a robot that powers up safely and moves: architecture, wiring, power, software and calibration.
$ node run.js --dry-run --path "walk:6,turn:3,stop:2"
Walking software for Raspberry Pi 5 (Node.js) is included with X8 + Simulator.
Run the X8 and its behaviors in real time.
Adjust the gait, read scope, IMU and joints.
Download the STL ZIPs and slice them.
Follow the 15-step 3D guide.
Load the walking software on your Raspberry Pi 5.
Joint axes taken from the servo horns in the CAD. Limits from collision sweeps. Masses from the real printed parts.
Eyes, eyelids and jaw on micro servos.
54 revolute joints with real limits.
4 fingers + thumb per hand.
55 links, 28 rigid bodies.
From research to education, from prototyping to industrial development — a simulator for everyone who works with humanoid robotics.
Advanced studies in humanoid robotics and AI.
Teach robotics with a robot students can see, then build.
Design, test and iterate new robot concepts.
Build and validate motion, control and AI algorithms.
Print and build your own humanoid at home or in the lab.
A high-performance platform for humanoid simulation — and the complete package to build the robot it simulates.
No. All packages are digital downloads. You print the parts yourself and buy servos and electronics separately; the guides and the electronics manual tell you exactly what to get.
No. You can simulate, program and analyze the X8 entirely in software. When you're ready, the STL files, assembly guide and walking software take you to the real robot.
We recommend X8 + Simulator: for $100 more than the documentation alone you can test, tune and debug the robot before printing a single part. Choose X8 Engineer if you want to modify the design in your own CAD software.
You get instant access: download the STL files and PDF guides right away. With X8 + Simulator and X8 Engineer you also receive the access link to YB Sim Studio X8.
Yes, in every package: 95 STL print files in 5 folders (hand, arms, head, torso, legs), a parts list CSV and five illustrated PDF guides covering parts, print settings, orientation and supports, finishing and assembly.
17× DS5160, 10× 40×20 class and 14× micro servos, driven by 3× PCA9685 boards. The built-in shopping list covers servos, brackets, Raspberry Pi 5, IMU, camera, battery and power regulators.
Yes. An animated 3D assembly guide walks you from the feet to the head in 15 steps, listing the servos and printed parts for each step.
Yes. Export the model as URDF, joints as JSON and servo configuration as JSON.
One-time payment. Instant digital download. Pick how deep you want to go.
Everything you need to print and build the X8.
Build it right the first time: test before you print.
Only $100 more than Documentation
The full CAD source to modify and re-engineer the design.
Hello, World!